Cable Bending Tester Charging Pile Testing Equipment
Product description
This device complies with Section 7.15 (Table 7) of GB/T20234.1-2015 and GB/T 11918.1-2014 “Industrial Plug
Header Sockets and Couplers Part 1 General Requirements” 24.4 The mechanical strength test requires simulating the bending and
twisting of the charging gun connector in actual use, and testing at the rate and angle required by the standard.
The equipment adopts PLC electrical control, intelligent operation of 7-inch color LCD touch screen, driven by servo motor, preset
test times (up to 99999 times), test speed, test angle, and has the function of current continuity detection. When the equipment
reaches the preset number of times or the on-current detection is disconnected, the current station stops action, and the current
number of tests is recorded and the sound signal of the end of the test is generated. The load can be connected externally to do
the load on-off test.
It is suitable for charging pile-related manufacturers and quality inspection departments to carry out the bending connection part
test of the “mechanical strength” part of the power connection cable of the plug and socket of the charging vehicle.
Product Features
1) The testing machine is driven by a stepper motor system, and is set and displayed on an intelligent touch screen.
The machine can be equipped with a load power supply (0-60A can be customized).
2) The testing machine can intelligently judge the short circuit, open circuit or adhesion, poor contact and other conditions of
the power cord, and can automatically stop, and display the corresponding channel of the test failure, and send out sound and
light alarms and character prompts to facilitate the research and development of wire faults.
3) The whole machine is composed of high-quality cold-rolled steel plate baking paint and electrophoretic aluminum alloy bracket,
which is beautiful and durable.
| Control System | Programmable Controller ( PLc ) |
| Screen settings and display data | Parameter monitoring, current preset, angle setting, speed preset, count setting, station selection, alarm indication and character prompt, etc. |
| Test station | 2 stations; the program can set the experiment of single station or any station by itself |
| Test rate | Can be set and intelligently adjusted 5~60 times/min ( r . p . m ) |
| Test bending rotation angle | Can be set and intelligently adjusted (5720 degree test angle can be preset) |
| Counter | 0~9999999 times can be preset, with power failure memory function |
| Weight and material | 2 sets of 20N, 25N, 50N, 75N, 100N weights each, the weight material is sus304# stainless steel |
| Optional test resistive/inductive load | 0-60A can be adjusted manually |
| Test voltage | ACo ~250v continuously adjustable, 31/2LED digital display, accuracy: 0.5 class |
| Test current | ACo ~60A continuously adjustable, 31/2LED digital display, accuracy: 0.5 class |
| An external power supply can be used to conduct experiments on the connection parts of electrical finished products; (excluding external frequency conversion power supply, outsourcing is required) |
|
| Equipped with an intelligent ammeter, which can set the upper and lower limit numbers, which is convenient for judging the short circuit, open circuit and adhesion of the power line under test, and can cut off the counter of the current station; |
|
| External band pointer showing bend angle | |
| 1 set of fixing brackets with wires, easy to install | |
| Power supply voltage: AC220V±5%, 50Hz10A | |
