Digital Power Plug Insertion Force Testing Machine Tester
Feature
1. Can do single hole plug test for connector
2. It can be used to connect the entire row of plug and pull tests to accept the connector life test
3. It can be used to test the retention force of a single connector product in the plastic
4. Can do connector NORMAL FORCE test
5. General compression and tensile failure test can be done
6. It can be connected to the side line of the contact impedance machine at the same time (optional)
7. Printable and storage graphics (plug displacement curve, life curve, inspection report)
8. The test data is stored in the hard disk (each data can be stored, unlimited times)
9. The test conditions are all set in writing by the computer, which is convenient and fast (including plug-in stroke, speed, pause time, etc.)
Determine the maximum load range | 2, 5, 10, 20, 50kg (optional) |
control method | Full touch |
Test speed | 0-200mm/min |
Maximum measuring height | 150mm |
Minimum resolution | 0.001kg or 1g |
Minimum fine-tuning distance | 0.01mm |
X axis movement range | 0-75mm |
Y axis movement range | 0-75mm |
Transmission mechanism | Japan THK ball screw drive |
Power supply | AC220V |
Volume | 360*260*940mm |
Product use/standard
This machine is used to test the insertion force and pull-out force of various connectors. With a dedicated automatic heart-seeking device, it will be able to obtain completely accurate insertion and pull-out force tests, inspection reports, etc. The automatic center finding device is adopted to solve the fixture problems of various connection tests, and the male and female connectors can be automatically aligned during the test, and there will be no single-sided problems.