Factory Outlets Economical Salt Spray Test Chamber Price For Laboratory - Low Noise Customization Blowing Sand and Dust Testing Chamber – Hongjin

Short Description:

Product Description This equipment is driven by a high-power fan to blow a certain concentration of sand and dust across the surface of the test sample at a certain flow rate, so as to evaluate the ability of these test samples (equipment) to prevent the penetration effect of dust particles when exposed to dry sand or dust-filled atmosphere. The ability of abrasive or blocking effect of grit and the ability to store and operate; at the same time, it can simulate the dust environment of low co...

Send email to us Download as PDF

Product Detail

Product Tags

Feedback (2)

We rely upon strategic thinking, constant modernisation in all segments, technological advances and of course upon our employees that directly participate in our success for Rust Grease Salt Spray Corrosion Tester , Electronic Temperature Thermal Shock Stability Test Chamber , Electronic Temperature Thermal Shock Stability Test Chamber , Presently, we're wanting forward to even higher cooperation with abroad shoppers depending on mutual rewards. You should really feel totally free to make contact with us for more aspects.

Factory Outlets Economical Salt Spray Test Chamber Price For Laboratory - Low Noise Customization Blowing Sand and Dust Testing Chamber – Hongjin Detail:

Product Description

This equipment is driven by a high-power fan to blow a certain concentration of sand and dust across the surface of the test sample at a certain flow rate, so as to evaluate the ability of these test samples (equipment) to prevent the penetration effect of dust particles when exposed to dry sand or dust-filled atmosphere. The ability of abrasive or blocking effect of grit and the ability to store and operate; at the same time, it can simulate the dust environment of low concentration and low wind speed. The target device can well simulate the high temperature bonding problem of the device or coating sample in the high temperature and dusty atmosphere. The data can be accurately read in each area (air duct entrance, sample surface, front and rear walls of the bottom plate, pipes), and the temperature can be adjusted in real time according to the needs; the wind speed, flow rate, furnace lighting, and fire viewing holes are specially made, and the heat is generated. The element adopts resistance wire, and can test the bonding condition of the resistance wire project, and the furnace lining and air supply pipes are all insulated.

Features

1. The equipment is in the form of an overall frame (rotary) structure. The test box is located in the middle of the equipment, the fan is in the middle and rear of the equipment, the rotary circulating air duct is connected to the test device, the sand feeding device is located at the upper air outlet of the test box, and the temperature control and dehumidification system is located in In the lower back of the box, the instrument control system is located at the lower left of the test box. 2. The circulating air duct is equipped with heaters, dehumidifiers, etc. 3. There is an observation window on the box door. The test box is a single door and is sealed with double layers of high temperature resistance. 4. The outer wall of the test chamber and the cyclone air duct is made of cold-rolled steel plate after anti-rust treatment, and the inner wall is made of lightweight fire-resistant bricks. The frame is made of 5# channel steel after anti-rust treatment. 5. The control adopts intelligent controller (display includes: air outlet, return air outlet and inside the box) 6. Sand and dust air circulation device: circulating air duct and high-power mixed flow fan. 7. Satisfaction: blowing dust flow dust test

Parameter

Carton size	About 2200mm(W)×1750mm(H)×950mm(D) (subject to actual design)
Box door	Fully open single door – type, with observation window on the box door
Studio temperature	RT+20ºC~+550ºC adjustable
Temperature uniformity	s±20ºC
Time control	Timing automatic control, timing precision 1min.
Panel display	The temperature and time of the laboratory can be recorded.
Test cross-sectional area	The cross-sectional area of the sand blowing test is 600 × 600 mm.
Temperature control	The circulating air duct is equipped with a heater
Sand and dust air circulation device	Circulating air duct and high-power mixed flow fan
Security measures	Equipped with grounding protection device; power supply undervoltage and leakage protection; motor overload protection; blower motor overload protection; the system has safety interlocking device
Shell material	High-strength double-sided galvanized steel sheet and surface fine powder baking paint
Inner box material	Lightweight fire brick
Operation mode	The motor speed is adjusted by the frequency converter, so as to adjust the wind speed of the whole device to achieve the wind speed required for the experiment

Product detail pictures:

Related Product Guide:
Cooperation

"Quality 1st, Honesty as base, Sincere company and mutual profit" is our idea, in an effort to create consistently and pursue the excellence for Factory Outlets Economical Salt Spray Test Chamber Price For Laboratory - Low Noise Customization Blowing Sand and Dust Testing Chamber – Hongjin , The product will supply to all over the world, such as: Swiss , Macedonia , Zimbabwe , So far our merchandise have been exported to east Europe, the Middle East, Southeast, Africa and South America etc. We have now 13years experienced sales and purchase in Isuzu parts at home and abroad and the ownership of the modernized electronic Isuzu parts checking systems. We honor our core principal of Honesty in business, priority in service and will do our best to provide our customers with high quality items and excellent service.

250l Ozone Aging Test Chamber