Four-column hydraulic press three-beam four-column hydraulic press powder forming hydraulic equipment

Short Description:

Product Detail

Product Tags

Introduce
This series of hydraulic presses are suitable for the pressing process of metal materials, such as stamping, bending, forming, extrusion, sheet drawing and pressing of powder products, and can also be used for hot pressing of plastic products. With independent hydraulic pump station and electrical control system. The hydraulic control adopts a cartridge valve integrated system. The oil pressure is displayed by a digital display electric contact pressure gauge, and the upper limit of the oil pressure can be set within the allowable range as required. The electrical system is centrally controlled by buttons, and has two operating modes: jog and semi-automatic. The working pressure and stroke can be adjusted within the specified range as required, and two molding methods of constant pressure and fixed stroke can be completed.

Parameter
Model		Unit	HJ- 315A	HJ- 315B	HJ-315C	HJ-315D	HJ-315E	HJ-400A	HJ-400B	HJ-400C	HJ-500A	HJ-500B
Nominal force		KN	3150					4000			5000	2500*2
Liquid maximum working pressure		Mpa	28					25			28	25
Cylinder stroke		mm	500	500	600	700	600	500	700	1000	600	600
Maximum opening		mm	900	1000	1100	1200	1100	1000	1200	1600	1200	1400
Effective table size	F · B in the left and right columns	mm	800	1000	1260	1260	1260	1000	1200	1400	1400	2200
Effective table size	Front and rear edges L·R	mm	800	1000	1160	1160	1160	1000	1200	1400	1400	1500
Total equipment height		mm	3500	3800	4200	4400	4000	3800	4300	4390	4350	4500
Fast forward speed		mm/s	60	90	100	100	100	100	100	120	70	120
Working speed		mm/s	8-13					8-12.5			12-16	5-12
Return speed		mm/s	68					74			71	80
Oil pump		YCY	63					80			63*2	125
Motor		KW	15			18.5					18.5*2	30
Nominal force of lower top cylinder		KN	400	630							1000
Lower top cylinder stroke		mm	200	300