Laboratory Battery Safety Testing Equipment Battery Burning Tester Machine for Battery Flame Resistance Test

Short Description:

Product introduction This machine is suitable for the flame resistance test of lithium battery (or battery pack). Drill a circular hole with a diameter of 102mm on an experimental platform, place a wire mesh on the circular hole, place the battery under test on the wire mesh screen, install an octagonal aluminum wire mesh around the sample, and then ignite The burner heats the sample until the battery explodes or the battery burns out, and the combustion process is timed controller tou...


Product Detail

Product Tags

Product introduction
This machine is suitable for the flame resistance test of lithium battery (or battery pack). Drill a circular hole with a diameter of 102mm on an experimental platform, place a wire mesh on the circular hole, place the battery under test on the wire mesh screen, install an octagonal aluminum wire mesh around the sample, and then ignite The burner heats the sample until the battery explodes or the battery burns out, and the combustion process is timed

controller touch
burner Bunsen burner with an inner diameter of 9.5mm and a length of about 100mm
flame application time 0~999.9s±0.1s
Test hole surface diameter 102mm
Test mesh screen A mesh screen with 20 meshes woven from stainless steel 

wire with a diameter of 0.43mm (0.017inch)

The height of the flame on the mesh screen 38mm
Octagonal grille width The distance between each pair is 24″ (610mm), octagonal, and 

the eight sides are movable for easy replacement and disassembly

Octagonal grill height 12″(305mm)
Inner box size W740xD730xH500mm (combustion gas methane or liquefied 

petroleum gas (customer provided)

 

燃烧_01 燃烧_02 燃烧_03 燃烧_04 燃烧_05 燃烧_06 燃烧_07 燃烧_08 燃烧-04

 


  • Previous:
  • Next:

  • Write your message here and send it to us
    WhatsApp Online Chat !