Laboratory Safety Tester Battery Explosion-Proof Test Machine For New Energy Vehicles
Applicable Standard GB 31241-2014 “Safety Requirements for Lithium-ion Cells and Battery Packs for Portable Electronic Products”
GB/T 18287-2013 “General Specification for Lithium-ion Batteries for Cell Phones” External Short-Circuit Requirements
UN38.3(2012) Recommendations on the Transport of Dangerous Goods – Manual of Tests and Criteria, Part III
IEC62133-2012 “Safety requirements for accumulators and accumulators containing alkaline or non-acid electrolytes”
IEC 62281: 2006 “Safety Requirements for Lithium Primary Cells and Accumulators in Transport”
IEC 60086: 2007 “Primary Battery Part 6 Safety Requirements for Lithium Batteries
| Test box size per layer | 500*500*500mm (length*width*height); (can also be customized according to customer requirements) |
| Outer box material | 1.5mm thick A3 steel plate and treated with baking paint, |
| Inner box material | SUS#201 Thickness 1.2mm |
| Single door, left open, the inner box door is made of stainless steel, and has a silicone pressure strip, and there is an observation window on the door | |
| The door is connected to the box by a strong hinge, and the door is locked with an explosion-proof cold handle | |
| The inside of the test box is affixed with Teflon tape, which is effectively insulated and flame retardant, and is easy to clean. | |
| On the right side of each layer of the box, there is a circular wire installation port, which is convenient for the test connection wire to pass through. | |
| There is a separate test panel to control the lighting and exhaust in each test chamber | |
Write your message here and send it to us
