Massive Selection for Ozone Aging Tester Chamber - Formaldehyde Environmental Simulation Testing Room Voc Test Chamber – Hongjin
Massive Selection for Ozone Aging Tester Chamber - Formaldehyde Environmental Simulation Testing Room Voc Test Chamber – Hongjin Detail:
Product Description
1. The inner cavity of the box is made of stainless steel, the surface is smooth and does not condense, and does not absorb formaldehyde, so as to ensure the detection accuracy. The constant temperature box is made of hard foam material, and the door is made of silicone rubber sealing strip, which has good thermal insulation performance and sealing performance. The box is equipped with a forced air circulation device (to form a circulating air flow) to ensure that the temperature and humidity in the box are balanced and consistent. This reduces energy consumption and reduces equipment equilibration time.
2. The 7-inch touch screen is used as the dialogue interface for personnel to operate the equipment, which is intuitive and convenient. It can directly set and digitally display the temperature, relative humidity, temperature compensation, dew point compensation, dew point deviation and temperature deviation in the box. It adopts imported sensors, and can automatically record and draw control curves. Configure special control software to realize system control, program setting, dynamic data display and historical data playback, fault record, alarm setting and other functions.
3. The equipment adopts industrial modules and imported programmable controllers, which have good operation stability and reliability, which can ensure the long-term trouble-free operation of the equipment, improve the service life of the equipment, and reduce the operating cost of the equipment. And it has the function of fault self-checking and prompting, which is convenient for users to understand the operation of the equipment, and the maintenance is simple and convenient.
4. The control program and operation interface are optimized according to the relevant test standards, and the operation is simple and convenient. 5. Change the current reciprocating mist humidity control, and use the dew point method to control humidity, so that the humidity in the box changes smoothly, thereby greatly improving the humidity control accuracy.
6. The imported thin-film high-precision platinum resistance is used as the temperature sensor, with high precision and stable performance.
7. The heat exchanger with advanced technology is used in the box, which has high heat exchange efficiency and reduces temperature gradient. 8. The key components of compressors, temperature and humidity sensors, controllers, relays and other equipment are all imported components. 9. Protection device: The climate box and the dew point water tank have high and low temperature alarm protection measures and high and low water level alarm protection measures.
10. The whole machine is integrated and the structure is compact; it is very simple to install, debug and use.
1. GB18580-2017 “Interior Decoration Materials – Formaldehyde Release Limits in Wood-based Panels and Their Products” 2. GB18584 “Limits of Hazardous Substances in Interior Decoration Materials Wooden Furniture” (Draft for Approval) 3. GB18587-2001 “Indoor decoration materials, carpets, carpet pads and carpet adhesives, the release limit of harmful substances” 4. GB17657-2013 “Experimental methods for physical and chemical properties of wood-based panels and veneer wood-based panels” 5. GB50325-2010 (2013 Board) “Code for Indoor Environmental Pollution Control of Civil Construction Engineering” 6. ASTM D6007-02 “Standard Test Method for Determination of Formaldehyde Concentration in Wood Products Released Gas in Small-scale Environmental Chambers” 7. LY/T 1612-2004 “1m3 climate box for formaldehyde emission detection” 8. SZJG 52-2016 “Limits of Hazardous Substances in Finished Furniture and Raw and Auxiliary Materials” 9. GB/T 2912.1-2009 “Textiles – Determination of Formaldehyde – Part 1: Free and Hydrolyzed” 10. GB/T 2912.2-2009 “Textiles – Determination of Formaldehyde – Part 2: Released Formaldehyde (Steam Absorption Method)” 11. GB/T 2912.3-2009 “Textiles – Determination of Formaldehyde – Part 3: High Performance Liquid Chromatography”
|
Studio size (D*W*H)
|
1000×800×1250(mm)
|
|
Temperature range
|
15ºC~40ºC
|
|
Temperature meter resolution
|
0.1ºC
|
|
Humidity range
|
30%~80%RH
|
|
Humidity Resolution
|
0.1%RH
|
|
Temperature fluctuation
|
≤±0.3ºC
|
|
Temperature uniformity
|
≤±1ºC
|
|
Temperature deviation
|
≤±0.5ºC
|
|
Humidity deviation
|
≤±3%RH
|
|
Studio wind speed
|
0.1~0.3m/s (wind speed adjustable)
|
|
Power supply
|
Test electricity 380V, 50Hz, 18KW
|
|
Air replacement rate
|
(0.2m³~1.5)m³/h, adjustment accuracy ±5% ventilation volume, continuously adjustable
|
Product detail pictures:
Related Product Guide:
Cooperation
abide by the contract", conforms to the market requirement, joins in the market competition by its high quality as well as provides more comprehensive and excellent service for clients to let them become big winner. The pursue of the company, is the clients' satisfaction for Massive Selection for Ozone Aging Tester Chamber - Formaldehyde Environmental Simulation Testing Room Voc Test Chamber – Hongjin , The product will supply to all over the world, such as: Senegal , Buenos Aires , Atlanta , We have top engineers in these industries and an efficient team in the research. What is more, we have our own archives mouths and markets in China at low cost. Therefore, we can meet different inquiries from different clients. Please find our website to check more information from our products.
By Salome
from Singapore
- 2018.09.12 17:18
Company director has very rich management experience and strict attitude, sales staff are warm and cheerful, technical staff are professional and responsible,so we have no worry about product,a nice manufacturer.
By Renee
from Guatemala
- 2017.05.21 12:31
