HONGJIN IP56X sand and dust test box (also known as sand and dust test device) is a dust-proof level test device manufactured according to the relevant test conditions of the shell dust-proof standard G4208 and other standards. How to maintain the sand and dust test box, the editor will give you some tips below.
The sand and dust test chamber is a kind of test device that tests the protective performance of the shell of the test sample by simulating the environment of fine particles such as dust and dust. It is usually used in the R&D department or testing organization of various enterprises. The principle of the sand and dust test box is relatively simple. Generally, talcum powder is used to simulate, and the operation of the blower device will continuously cause dust circulation in a sealed box.
Many purchasers or users often ask about the maintenance of sand and dust test chambers when purchasing equipment. Today, Xiaobian will give you a brief explanation.
When maintaining the IP56X sand and dust test chamber, we must pay attention to the use of dust. In order to ensure the test effect, please use dry talc powder. In order to ensure that the dust does not absorb moisture and cause dust generation difficulties, try to dry the used talc powder after recycling, including the inner wall of the box, there may be dust attached to it. , and try to use the matching shovel to produce the dust before disposal and use, or treat it as waste material.
For the maintenance of other machines, according to the operating instructions, the general operating time should not exceed 40 hours continuously, because the fans and heating devices of the sand and dust test chamber also need to rest. Well.
Well, the above is a few maintenance suggestions provided by Xiaobian for you, I hope it will be helpful to you.
Post time: Apr-29-2022