Universal tensile testing machine can be used in many fields, like composite film, textile, rubber, waterproof materials, etc. Next, let’s understand what matters need to be paid attention to in the use of tensile testing machine:
1. Before the tension machine is energized, ensure that the power supply voltage conforms to the input voltage value of the tension machine rules. The tension machine equipped with three-wire power plug is necessary to plug into the power supply socket with protective grounding to ensure safety.
2. The use of tension machine, the input signal or external load should be bound in the rules of planning, prevent overload operation.
3. It is necessary to carry out no-load operation to ensure no fault before loading and using the tension machine. Wipe with lubricating oil before use, wipe clean after use. After use, we should pay attention to cleaning, which can not only prevent damage and mildew problems, but also facilitate people to operate, the first operation of personnel, must have a professional person to guide from the side.
4. Before operating the tension machine, read the instruction manual and operate according to the above requirements. Before using the electronic tension machine, it is necessary to check the surrounding environment, power supply voltage, boot detection and host grounding. And check correct before power.
5. During the test, if the tension exceeds the calibration value of the instrument, the system will give the load alarm. At this time, as long as the load is removed, and then press the “clear” key, the overload alarm can be lifted.
6. During the test, do not press other buttons on the control box except stop case and emergency stop switch, otherwise the test results will be affected
Post time: Mar-17-2023