The thermal shock test chamber is composed of a lot of parts, so each part is different, and naturally the cleaning of it is also different. After the hot and cold shock test chamber has been used for a long time, dirt will accumulate on the inside and outside of the equipment, and these dirt need to be cleaned regularly. In addition to removing dust from the outside of the equipment and keeping it clean, the inside of the equipment Regular cleaning of components is even more important.
Therefore, the cleaning of the internal parts of the equipment should be timely and accurately cleaned in place. The main components of the equipment are humidifier, evaporator, circulating fan, condenser, etc. The following mainly introduces the cleaning methods of the above components.
1. Evaporator: Under the action of strong wind in the cold and heat shock test chamber, the cleanliness level of the samples is different. Then dust will be produced, and these fine dusts will condense on the evaporator. It should be cleaned every three months.
2. Humidifier: If the water inside is not cleaned regularly, scale will be generated. The existence of these scales will cause the humidifier to form a dry burn when it is working, which will cause damage to the humidifier. Therefore, it is necessary to replace the clean water in time and clean the humidifier regularly.
3. Circulation fan blade: It is the same as the evaporator. After a long time, it will gather a lot of small dust, and the cleaning method is the same as that of the evaporator.
4. Condenser: Its interior needs decontamination and dust removal to ensure good ventilation and heat transfer performance and continuous heat transfer performance.
Cleaning and maintenance is very important, and it cannot be dragged. The longer it is delayed, the more harmful it will be to the equipment. Therefore, the cleaning of the components of the thermal shock test chamber cannot be sloppy.
Post time: Dec-19-2022