Spring Tension And Compression Testing Machine/Spring Tensile Compress Tester
Features
1. It can automatically measure the tension, pressure and elastic coefficient of the spring, and can measure four points at the same time;
2. Using touch screen operating system, the operation is simple and convenient;
3. The power division value can be freely set up to three decimal places of 0.001N. The displacement can reach 0.01MM;
4. With automatic and manual zero capture function. High-efficiency zero capture can be achieved, and the height can be automatically remembered when power is turned off;
5. The pressure test can realize the double test of the height method and the deformation method (pressure method: can realize the test spring
The force corresponding to how long the compression remains. Deformation method: How much downward compression can be achieved after hitting the spring. two function can measure 4 points at the same time).
6. Preload and rigidity compensation correction can ensure the accuracy of the measured value;
7. Load sensor overload protection and emergency stop function;
8, with a micro-printer.
Control method | Full touch |
Test load type | 10kgf |
Minimum display load | 0.01g |
Single bit | gf, kgf, lbf, N (can be switched at will) |
Maximum test stroke | 200mm |
Minimum display stroke | 0.01mm |
Testing speed | 0-300mm/min |
Standard pressure plate diameter | ∮60 mm |
Machine size | W420*D650*H700mm |
Machine weight | 50kg |
Power supply | 220V |